Worldlink Question

Talonp · Post by **Talonp** » Tue Jun 10, 2008 2:16 pm

Hey everyone could some on that is using the Worldlink add the forum user.wg.sysops and post a message in the forum or reply to the one in the forum please...just trying to see if they fixed the damn configuration issues yet.

Thanks

Toyduck · Post by **Toyduck** » Tue Jun 10, 2008 11:11 pm

Talonp wrote:Hey everyone could some on that is using the Worldlink add the forum user.wg.sysops and post a message in the forum or reply to the one in the forum please...just trying to see if they fixed the damn configuration issues yet.

Thanks

Ok I posted a message just a few minutes ago. I has sorta given up, not having seen any messages and the WL sysop telling me the reason was not traffic.

dspain · Post by **dspain** » Wed Jun 11, 2008 1:14 am

Toyduck wrote:
Talonp wrote:Hey everyone could some on that is using the Worldlink add the forum user.wg.sysops and post a message in the forum or reply to the one in the forum please...just trying to see if they fixed the damn configuration issues yet.

Thanks
Ok I posted a message just a few minutes ago. I has sorta given up, not having seen any messages and the WL sysop telling me the reason was not traffic.

yeah all the mroe reason we should use the worldlink server and start our own WL network.

Toyduck · Post by **Toyduck** » Wed Jun 11, 2008 1:18 am

Did anyone get my message, or even see it?

dspain · Post by **dspain** » Wed Jun 11, 2008 1:27 am

Toyduck wrote:Did anyone get my message, or even see it?

im not linked on the forums ill check WGW.

Talonp · Post by **Talonp** » Wed Jun 11, 2008 1:27 am

Cant tell I cant connect to the Worldlink server....I think its down

dspain · Post by **dspain** » Wed Jun 11, 2008 1:29 am

Talonp wrote:Cant tell I cant connect to the Worldlink server....I think its down

hmm worldlink hub worldgroupware.com is online, i think they push that to the gcomm.com domain which is down at the moment.

reason #2 why we need our own

Talonp · Post by **Talonp** » Wed Jun 11, 2008 1:31 am

Agreed

dspain · Post by **dspain** » Wed Jun 11, 2008 1:32 am

Talonp wrote:Agreed

i swore at one time i had that worldlink server software, ill have to look again.

Talonp · Post by **Talonp** » Wed Jun 11, 2008 1:34 am

Rick has the code for it ... but yeah we need one for the community Worldgroupware's server is always down and so is Gcomm.com

dspain · Post by **dspain** » Wed Jun 11, 2008 1:36 am

Talonp wrote:Rick has the code for it ... but yeah we need one for the community Worldgroupware's server is always down and so is Gcomm.com

i found the code for the worldlink video server but not the actual client software for the chatlink server itself.

Talonp · Post by **Talonp** » Wed Jun 11, 2008 1:37 am

Damn that sucks

dspain · Post by **dspain** » Wed Jun 11, 2008 1:38 am

Talonp wrote:Damn that sucks

could always go back to chatlink, LOL

Talonp · Post by **Talonp** » Wed Jun 11, 2008 1:43 am

hehe the Worldlink system would work the best unless we want to start over from scratch and I don't think we really want to do that, if for no other reason then the time it would take

The Storm · Post by **The Storm** » Wed Jun 11, 2008 2:23 am

I haven't been able to connect for a couple of days. Maybe another system should be considered.

Talonp · Post by **Talonp** » Wed Jun 11, 2008 2:29 am

The Worldlink system is the most resent network code and we have access to it so Worldlink would be our best bet just not with Worldgroupware

With a new server we would have a system to start building the community with a new Link and Forum system.

It will all come together soon you can count on it

Talonp · Post by **Talonp** » Wed Jun 11, 2008 2:41 am

Well worldlink.worldgroupware.com is back online but no messages transmitted so the best I can tell is they still have the configuration fubared and it is a dead network for now

As dspain said another reason to put up a new one

The Storm · Post by **The Storm** » Wed Jun 11, 2008 2:59 am

Talonp wrote:Well worldlink.worldgroupware.com is back online but no messages transmitted so the best I can tell is they still have the configuration fubared and it is a dead network for now

As dspain said another reason to put up a new one

How much bandwidth do you think the network would take up? I'm just wondering as I have a VPS but can't DOS the node ...

Talonp · Post by **Talonp** » Wed Jun 11, 2008 3:04 am

Not sure on the bandwidth .... but I have offered to host a Worldlink server on a OC3 in Washington, DC

The Storm · Post by **The Storm** » Wed Jun 11, 2008 3:44 am

Talonp wrote:Not sure on the bandwidth .... but I have offered to host a Worldlink server on a OC3 in Washington, DC

Hopefully, someone takes you up on it as it's a needed feature. I would love to see network mail working again.

frcorey · Post by **frcorey** » Wed Jun 11, 2008 4:23 am

Talonp wrote:Well worldlink.worldgroupware.com is back online but no messages transmitted so the best I can tell is they still have the configuration fubared and it is a dead network for now

As dspain said another reason to put up a new one

it's just dead. err, when it works...
I used to post on it and got like 3 messages a year,
mostly from other bored sysops like me...

Toyduck · Post by **Toyduck** » Wed Jun 11, 2008 9:54 pm

dspain wrote:
Talonp wrote:Agreed
i swore at one time i had that worldlink server software, ill have to look again.

Well quit searing and start looking

Toyduck · Post by **Toyduck** » Wed Jun 11, 2008 10:06 pm

I have never had a problem connecting to Worldlink, I just have never received any forum (or email) messages.

If someone gives me their WG mail and wg domain, I'll try sending them a worldlink email.

Talonp · Post by **Talonp** » Wed Jun 11, 2008 10:25 pm

Give it a shot here is my info

sysop@worldgroup.gcommlive.com and the domain is worldgroup.gcommlive.com

Toyduck · Post by **Toyduck** » Thu Jun 12, 2008 4:44 am

Talonp wrote:Give it a shot here is my info

sysop@worldgroup.gcommlive.com and the domain is worldgroup.gcommlive.com

Ok, sent a message 2148; 6/11/08.

my address is Sysop@informationware.com

I will try to keep connecting everyday and see if I pickup an answer (or even delivered my message).

Talonp · Post by **Talonp** » Thu Jun 12, 2008 6:11 am

I got two messages both came in as Internet emails, meaning the return address was IN:email@domain.com. So I guess my question is how was this sent via Worldlink?

BTW Thanks for all the help with this testing Toyduck

Talonp

Talonp · Post by **Talonp** » Thu Jun 12, 2008 6:16 am

Just got a post in the Worldlink forum user.sysop from Toyduck and I have sent back a response...so it looks like its working again

Stoneslinger76 · Post by **Stoneslinger76** » Thu Jun 12, 2008 3:49 pm

Talonp wrote:Just got a post in the Worldlink forum user.sysop from Toyduck and I have sent back a response...so it looks like its working again

They are coming thru to my bbs. Hopefully we can more sysops to config the forums. Is their a way to automatically add them? Mainly the user created ones.

user.BeoDude
user.blueice
user.brazil
user.bre
user.c21.commercial
user.caraudio
user.cdc
user.Cellular.Phones
user.Chat

to name a few.

I was also chating with a wg2 sysop the other day and he was curious if their is a WorldLink for wg2.

dspain · Post by **dspain** » Thu Jun 12, 2008 6:57 pm

Stoneslinger76 wrote:
Talonp wrote:Just got a post in the Worldlink forum user.sysop from Toyduck and I have sent back a response...so it looks like its working again

They are coming thru to my bbs. Hopefully we can more sysops to config the forums. Is their a way to automatically add them? Mainly the user created ones.

user.BeoDude
user.blueice
user.brazil
user.bre
user.c21.commercial
user.caraudio
user.cdc
user.Cellular.Phones
user.Chat

to name a few.

I was also chating with a wg2 sysop the other day and he was curious if their is a WorldLink for wg2.

funny you mentioned that, i was working with the old chatlink source other day, i can get it to work if i plug through the ico i do believe,
ill play with it more.

Toyduck · Post by **Toyduck** » Thu Jun 12, 2008 9:18 pm

Talonp wrote:I got two messages both came in as Internet emails, meaning the return address was IN:email@domain.com. So I guess my question is how was this sent via Worldlink?

BTW Thanks for all the help with this testing Toyduck

Talonp

Interesting; I have SMTP and POP3 disabled on my system, don't use it at all. I sent two messages becasuse I didn't think the first one went through, but used the WL: prefix for Worldlink.

It also took long enough for the forum message, maybe it's just slooooow...?

But if post a list of forums somewhere, I'd be happy to enter them on my system, we might actually see some messages if we were all using the same forums, no?

Talonp · Post by **Talonp** » Thu Jun 12, 2008 10:21 pm

These are the ones I have setup so far;

user.bbs.ads
user.alt.bbs.hamradio
wl.isv.mkw
user.mud.games
user.sysop
user.tw2002
user.wg.sysops
alt.bbs
alt.bbs.ads
alt.bbs.internet
alt.bbs.majorbbs
alt.mud.majormud

The alt forums I have setup to share the forum for that USENET feed...example US:alt.bbs.ads; WF:alt.bbs.ads

The Storm · Post by **The Storm** » Fri Jun 13, 2008 12:53 am

Talonp wrote:These are the ones I have setup so far;

user.bbs.ads
user.alt.bbs.hamradio
wl.isv.mkw
user.mud.games
user.sysop
user.tw2002
user.wg.sysops
alt.bbs
alt.bbs.ads
alt.bbs.internet
alt.bbs.majorbbs
alt.mud.majormud

The alt forums I have setup to share the forum for that USENET feed...example US:alt.bbs.ads; WF:alt.bbs.ads

Do you have a quick start guide to setting up WL forums?

I know, that sounds weird but I've been out of touch with such things over the last few years.

dspain · Post by **dspain** » Fri Jun 13, 2008 1:13 am

The Storm wrote:
Talonp wrote:These are the ones I have setup so far;

user.bbs.ads
user.alt.bbs.hamradio
wl.isv.mkw
user.mud.games
user.sysop
user.tw2002
user.wg.sysops
alt.bbs
alt.bbs.ads
alt.bbs.internet
alt.bbs.majorbbs
alt.mud.majormud

The alt forums I have setup to share the forum for that USENET feed...example US:alt.bbs.ads; WF:alt.bbs.ads
Do you have a quick start guide to setting up WL forums? I know, that sounds weird but I've been out of touch with such things over the last few years.

WGSERV\HELP\WORLDLNK.HLP

that should help ya out.

The Storm · Post by **The Storm** » Fri Jun 13, 2008 1:33 am

dspain wrote:WGSERV\HELP\WORLDLNK.HLP

that should help ya out.

Yea, I actually found it just after posting and got forums working to my liking. Maybe I can create a mod to help add a tagline to the bottom of WL messages for better advertising options

Provided that I don't keep making simple mistakes in my dev as I've been having a heck of a time to get anything to work when compared to the skeleton module.

dspain · Post by **dspain** » Fri Jun 13, 2008 1:40 am

The Storm wrote:
dspain wrote:WGSERV\HELP\WORLDLNK.HLP

that should help ya out.
Yea, I actually found it just after posting and got forums working to my liking. Maybe I can create a mod to help add a tagline to the bottom of WL messages for better advertising options

Provided that I don't keep making simple mistakes in my dev as I've been having a heck of a time to get anything to work when compared to the skeleton module.

what kind of problems?

a sig module you mean? yeah that would be nice.

The Storm · Post by **The Storm** » Fri Jun 13, 2008 2:39 am

dspain wrote:
what kind of problems?

a sig module you mean? yeah that would be nice.

The kind of problem where I need to learn how to put semi-colons after my int statements so I don't pull my hair out...LOL

Yea, a sig mod would be cool. I'll add it to the largely growing list of things I have to write. I'm writing a simple mod right now just to hone my skills since it's been a LONG time.

dspain · Post by **dspain** » Fri Jun 13, 2008 2:55 am

The Storm wrote:
dspain wrote:
what kind of problems?

a sig module you mean? yeah that would be nice.
The kind of problem where I need to learn how to put semi-colons after my int statements so I don't pull my hair out...LOL

Yea, a sig mod would be cool. I'll add it to the largely growing list of things I have to write. I'm writing a simple mod right now just to hone my skills since it's been a LONG time.

and remember the typedefs

INT proto_type(VOID)
{
}

CHAR proto_type(VOID)
{
}

etc....

Stoneslinger76 · Post by **Stoneslinger76** » Fri Jun 13, 2008 10:19 am

dspain wrote:
Stoneslinger76 wrote:
Talonp wrote:Just got a post in the Worldlink forum user.sysop from Toyduck and I have sent back a response...so it looks like its working again

They are coming thru to my bbs. Hopefully we can more sysops to config the forums. Is their a way to automatically add them? Mainly the user created ones.
user.BeoDude
user.blueice
user.brazil
user.Chat

to name a few.

I was also chating with a wg2 sysop the other day and he was curious if their is a WorldLink for wg2.
funny you mentioned that, i was working with the old chatlink source other day, i can get it to work if i plug through the ico i do believe,
ill play with it more.

That would be alot easier if we can get them auto update or automatically generate the formums conected to WL.

Stoneslinger76 · Post by **Stoneslinger76** » Fri Jun 13, 2008 10:52 am

dspain wrote:
The Storm wrote:
dspain wrote:WGSERV\HELP\WORLDLNK.HLP

that should help ya out.
Yea, I actually found it just after posting and got forums working to my liking. Maybe I can create a mod to help add a tagline to the bottom of WL messages for better advertising options

Provided that I don't keep making simple mistakes in my dev as I've been having a heck of a time to get anything to work when compared to the skeleton module.
what kind of problems?

a sig module you mean? yeah that would be nice.

Yes a sig module would be great

banjaxster · Post by **banjaxster** » Fri Jun 13, 2008 2:58 pm

whats the woldlink server address? I have had wl running for a long time and havent got a message in a very long time.
Im sure i still have to old address.

dspain · Post by **dspain** » Fri Jun 13, 2008 3:04 pm

banjaxster wrote:whats the woldlink server address? I have had wl running for a long time and havent got a message in a very long time.
Im sure i still have to old address.

worldlink.worldgroupware.com

banjaxster · Post by **banjaxster** » Mon Jun 16, 2008 1:44 am

Ok i have WL up and now connected.
Now to get Ml working(mail link),mail link is the one with the forums not worldlink.
WL lets you talk to other people on other boards through your wl tele channel.
Mail link has a big list of foums that you setup so you can share your forum messages with other boards,I haven't had a message from this in a long time.Marc at dialsoft was the hub i used to have but I think he has stopped being the hub.
How to be the ML hub would be a good question to be answered.

dspain · Post by **dspain** » Mon Jun 16, 2008 1:50 am

banjaxster wrote:Ok i have WL up and now connected.
Now to get Ml working(mail link),mail link is the one with the forums not worldlink.
WL lets you talk to other people on other boards through your wl tele channel.
Mail link has a big list of foums that you setup so you can share your forum messages with other boards,I haven't had a message from this in a long time.Marc at dialsoft was the hub i used to have but I think he has stopped being the hub.
How to be the ML hub would be a good question to be answered.

that means dialsoft probably owns the maillink software, anyone interested drop him a line see whats up.

banjaxster · Post by **banjaxster** » Mon Jun 16, 2008 1:51 am

I just want to correct myself,WL does have message forums but I always used the ML ones,I have them attached to my forums.
You can get ML(Mail LinK)from marc for free.

dspain · Post by **dspain** » Mon Jun 16, 2008 2:23 am

banjaxster wrote:I just want to correct myself,WL does have message forums but I always used the ML ones,I have them attached to my forums.
You can get ML(Mail LinK)from marc for free.

yeah i was referring to the hub software to act as a hub.
i have a fidonet hub running here at the house, that hubs fidonet, doornet, and dds file distribution echoes, if i had the room i'd put a hub up.

banjaxster · Post by **banjaxster** » Mon Jun 16, 2008 2:43 am

I figured out how to attach one of my local forums to one of the WL forums,now to see if my message will go.
It's not an easy thing to do.....

Talonp · Post by **Talonp** » Mon Jun 16, 2008 2:46 am

What WL forum did you post in? I will check on my end and respond

banjaxster · Post by **banjaxster** » Mon Jun 16, 2008 1:20 pm

I posted to the user.Chat forum.

Talonp · Post by **Talonp** » Mon Jun 16, 2008 2:08 pm

Ok I have added the WL forum to my system and sent a test message we will see what happens

keep me posted.

banjaxster · Post by **banjaxster** » Tue Jun 17, 2008 2:30 am

I just checked and my WL is connected but no messages.
I will try another message

The Major BBS Forums (Archive)

Worldlink Question

Worldlink Question

Re: Worldlink Question

Re: Worldlink Question